SLIDE #1 | Naked chair instructions

  • on

SLIDE #1 | Naked chair instructions

  • on

Thanks for buying this fantastic chair! Please do follow the steps below to build it correctly and without effort.

Important note

As this chair uses a sliding method you need to be careful to push/pull the elements in the right direction without forcing them, otherwise you could break them. Just do it slowly, bit by bit and evenly on each side.

Step 1

Put one side on the floor (best if on a rug or carpet).

SLIDE #1 | Naked chair instructions - image 1

Step 2

Insert all the lateral pieces so that each "hook" enters in the middle of the corresponding hole.

SLIDE #1 | Naked chair instructions - image 2

So that you have each piece loosely into their place.

SLIDE #1 | Naked chair instructions - image 3

Step 3

Now add the other side and make sure all the hooks enter into place as well. No need to go all the way, yet.

SLIDE #1 | Naked chair instructions - image 4

Step 5

Now turn the chair upright and gently push the sides and the other pieces so that the hooks come out fully on the other side.

SLIDE #1 | Naked chair instructions - image 5

Step 6

There's a small piece you'll have to use to fix the backrest piece to the chair's frame. Do it as you can see in the pictures below.
First, you should pull down de backrest piece until its place and then fix it with the 'c' shaped small piece.

 

Step 7

The final step will be introducing the small cylindrical wooden block on both legs to help keep everything in place and ready to use.

SLIDE #1 | Naked chair instructions - image 10
SLIDE #1 | Naked chair instructions - image 11

 

Newer Post